Biampspeakers
Biamp H10-G
Equipment Sales & Professional Installation
MPN: H10-G
- Cost effective voice paging and signal horn
- Rugged construction for industrial applications
- IP66 Indoor/Outdoor ready
- Permanently attached and water-sealed input wire
- Externally accessible 6-position tap switch
Specifications
Specifications
| Operating Mode | Passive with selectable low-impedance or 70 V/100 V operation, single-amplified with DSP |
|---|---|
| Operating Environment | Indoor or Outdoor Direct Exposure |
| Operating Range (-10 dB) | 530 Hz to 6.5 kHz |
| Nominal Beamwidth (H x V) | 135 deg x 135 deg |
| Transducer | MF: 1 x 1.4" (36 mm) voice coil compression driver |
| Sensitivity @ 1 m | 104 dB (2.83 V); 104 dB (1 W, 8 ohm) |
| Nominal Continuous Power Handling | 9 V (10 W, 8 ohm rated impedance) |
| Nominal Maximum SPL (Processed) @ 1 m | Continuous 113 dB, Peak 119 dB |
| Rated Continuous Voltage | 8.9 V (19 dBV) |
| Rated Maximum SPL (Processed) @ 1 m | Continuous 113 dB, Peak 125 dB |
| Transformer | 70 V: 10 W, 5 W, 2.5 W, 1.25 W, 0.625 W; 100 V: 10 W, 5 W, 2.5 W, 1.25 W |
| Required Accessories | 425 Hz, 6 dB/oct. Butterworth high pass filter; DSP preset |
| Recommended Amplifiers | 10 W - 20 W, 8 ohm (9 V - 13 V) |
| Input Connection | 2 x 0.3 mm2 conductor, 1 m (39.3") cable |
| Controls | Wattage / low impedance selector switch |
| Mounting Provisions | U-Bracket |
| Compliance | IEC 62368-1 certified |
| Environmental Rating | IP66 per IEC 60529 |
| Dimensions H x W x D | 140 mm x 140 mm x 193 mm (5.51" x 5.51" x 7.6") |
| Weight (with U-Bracket) | 1.17 kg (2.6 lbs) |
Documents
Ready to Use This Equipment on Your Project?
Expert recommendations, pricing, and professional installation for your space and application.